540 BB CHEVY LONG BLOCK CUSTOM CRATE MOTOR

WE BELIEVE IF NO TWO CARS OR DRIVERS ARE THE SAME, THEN HOW CAN THE MOTOR YOU ARE BUYING BE THE SAME ?

AT E&R RACING WE BELIEVE IN PROVIDING YOU WITH WHAT YOU NEED, NOT JUST WHAT WE SELL, BECAUSE WE MAKE MORE MONEY IF WE BUILD 10 THE SAME WAY, WE DONT HAVE TEN OF THE SAME CUTOMERS, SO WITH THAT SAID THIS IS JUST ONE OF THE MANY COMBINATIONS THAT WE OFFER,

WE START WITH A MERLIN lll BLOCK AND HONE IT TO 4.500 WITH DECK PLATES, WE THEN EQUALL DECK IT TO PROVIDE THE COMPRESSION RATIO WE ARE LOOKING FOR

THEN HERE IS A LIST OF PARTS THAT GO INTO IT

KB HYPEREUTECTIC PISTONS WITH A FAST BURN STEP HEAD, W/118CC HEAD IT WOULD =9.5-1 COMP.

EAGLE 4.250 STROKE CAST/STEEL CRANK

EAGLE SIR I-BEAM FORGED RODS, BUSHED, AND HAVE ARP 7/16 CAP SCREW BOLTS

SPEED PRO PLASMA MOLLY FILE FIT RINGS

MICHIGAN/CLEVITE 77 ROD, MAIN AND CAM BEARINGS

R.H.S. CAST IRON 320cc AS CAST HEADS COMPLETE

COMP CAMS HYD-CAM AND LIFTERS

CLOYES DOUBLE ROLLER TIMING SET

ALUMINUM FRONT COVER

MOROSO OIL PAN AND P/U SCREEN

MELLING OIL PUMP AND H.D OIL SHAFT

COMP CAMS ROLLER TIP ROCKERS & PUSHRODS

PRP BALANCER

CHROME VALVE COVERS

EDELBROCK INTAKE MANIFOLD

ARP HEAD BOLTS

FELPRO GASKETS

BRASS FREEZE PLUGS

AFTER INSPECTION OF ALL THE PARTS WE BALANCE THE ROTATING ASSEMBLY IN HOUSE TO MAKE SURE IT IS TO OUR SPECS,THE CRANK IS THEN MICRO POLISHED AND FINAL WASHED.

ALL PARTS ARE FINAL WASHED BY HAND AND THE ASSEMBLY BEGINS.THIS IS WHERE IT GETS TIME CONSUMING!! WE NOW HAVE TO INSTALL AND TORQUE ALL THE BRGS IN PLACE AND START MEASURING OIL CLEARANCES. DEPENDING ON HOW YOU ARE GOING TO USE THE ENGINE DEPENDS ON HOW WE SET THEM.IT CAN TAKE 3 SETS OF BEARINGS OR MORE TO BUILD ONE MOTOR THE RIGHT WAY!!

NEXT WE FILE FIT THE RINGS, AGAIN DEPENDING ON HOW IT WILL BE USED,WILL DETERMINE THE RING GAP.

WE WILL CHOOSE BETWEEN 4 OR 5 DIFFERENT CAM PROFILES TO SUIT YOUR BEST NEEDS

THE CAM WILL THEN BE DEGREED IN AND A CRANE LOCK PLATE INSTALLED

FROM THERE THE REST OF THE MOTOR WILL BE ASSEMBLED, WE WILL CHOOSE BETWEEN 2-3 DIFFERENT EDELBROCK INTAKES AGAIN ONCE WE DETERMINE HOW IT WILL BE USED.

MANY UPGRADES ARE AVAILABLE FROM HYD-ROLLER, ALUMINUM HEADS, ECT

pictures are for general purpose only and may include upgrades

these are custom built for you on average it takes 14 bussiness days to complete however, please allow 3-4 weeks in case of back logs.some parts may be substituted do to back orders and or shortages, you will be notified of any changes, thanks

call with any questions 630-279-5464 jeff

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: VILLA PARK, IL Get Directions

This ad expires in 27 days.